Waterproof Microcement Set for Bathrooms, showers, and Wet Areas incl. PU Matte Sealant

Complete set including everything you need to apply and waterproof microcement indoors and outdoors.

CA$205.99from CA$185.39 (CA$17.66 / kg)
Delivery time: 1-5 Business Days
(28 reviews)
  • Bicomponent reinforced microcement applicable to all surfaces such as concrete, metal, plastic, wood, etc.
  • Properties: High load-bearing capacity, weatherproof, UV-resistant
  • Curing time per coat at 20°C: Microcement approx. 8h, PU Topcoat approx. 12h
  • Scope of delivery for walls: Medium-grained powder + Liquid B acrylic resin + WB Pigment + PU Finish resin and hardener
  • Scope of delivery for floor: Large-grained powder + Medium-grained powder + Liquid B acrylic resin + WB Pigment + PU Finish resin and hardener
  • Label elements
1. Select colour
2. Select application area

Choose Select colour first.

3. Select quantity

Choose Select application area first.

Instructions for Use

Primer

chevronBottom
  1. The substrate must be stable, dry, and free of dirt, separating agents, and coarse unevenness.
  2. Sand off any unevenness.
  3. If required use our Putty Primer on your walls and 2K EP Levelling Compound on your floor to level and prime, for example on tiles.
  4. If your area to be coated is already levelled and smooth, use either our 2K Bonding Primer (for non-absorbent surfaces) or Deep Primer (for absorbent surfaces) to prime your substrate.

Main Coating

chevronBottom
  1. Mix microcement A components with the Liquid B component in the mixing ratio specified on the label.
  2. Add 2% WB pigment to colour the material (i.e. 2x100 g WB Pigment to 1 bag microcement powder and its liquid B-component).
  3. Spread the material thinly with a trowel and allow to dry.
  4. Sand off any unevenness in the surface greater than 3mm and vacuum up any sanding dust.
  5. Apply a second coat in the same way within 24 hours.

Application of microcement on walls: Layer 1 (medium grain size): 1.2 kg/m², Layer 2 (medium grain size): 1.2 kg/m² Application of microcement on a floor: Layer 1 (large grain size): 1.6 kg/m², layer 2 (medium grain size): 1.2 kg/m² 

Pro Tip: If you exceed 24 hours between the microcement layers, sand the first layer and remove the dust. This roughens the surface for better bonding and ensures the next layer won't break off. For stubborn fine particles, use a light brush of liquid B. Brush or roll on a small amount to avoid flooding the surface. 

Sealant 

chevronBottom

Note: For wet rooms, surfaces with direct water contact, as well as heavily used surfaces (high mechanical load, cleaning with aggressive cleaning agents, etc.), we recommend sealing the surface with EPODEX Polyurethane Resin (PU Finish) in matte.

  1. To mix, pour the entire contents of PU Finish Component B into the container of PU Finish Component A and mix thoroughly.
  2. Apply the material thinly and in a crosshatch pattern using a paint roller and brush. First paint laterally to the light source, then wet-on-wet in the direction of the light to avoid visible brush marks.
    Important: Especially inside the shower and in areas with permanent water contact, we recommend applying our PU Finish exclusively with a brush (e.g. 10 cm / 4" width) in a crosshatch pattern to fully close all pores. For heavily textured surfaces outside the wet area, a brush should also be used (and not a paint roller). We recommend two coats.
  3. Allow the material to cure for at least 16 hours, then apply the second coat.
  4. Allow the material to cure for 48 hours after the second coat. Inside the shower and in areas with permanent water contact, allow 7 days to cure before the coating comes into contact with water.

Note

chevronBottom

Pro Tip: To ensure that your PU is applied everywhere, apply the quantity received in 2 coats. By applying 2 coats in a criss-cross motion, the chance of an unsealed gap is greatly reduced.

Customer Service: If you have further questions, please contact us by phone, e-mail or use our Livechat support.

Note: Please note that due to different lighting conditions and monitors, the colours may not be uniformly displayed.

Microcement Seamless Design

EPODEX Microcement is a versatile, easy-to-apply decorative levelling compound designed to create seamless, modern surfaces. It can be applied to floors, walls, stairs, tables, and much more. Create a unique, contemporary look in no time. From exposed concrete finishes with natural cavities to multi-coloured designs with striking 3D effects, the possibilities are endless.

Our microcement is suitable for both indoor and outdoor applications and can be applied to almost any surface, including parquet, tiles, natural stone, drywall, metal, ceramic, marble, OSB, and more. The material is highly durable and UV-resistant while remaining slightly flexible and breathable, making it an excellent choice for a wide variety of decorative projects.

Polyurethane Resin Floors

Completely Waterproof

EPODEX Microcement, when combined with our polyurethane resin sealant (PU Finish), creates a waterproof surface, making it ideal for showers and other wet areas.

Once the microcement has fully hardened, the PU Finish is applied with a roller as the final protective sealing layer.

reviews

5
96%
4
4%
3
0%
2
0%
1
0%
5.0
Based on 28 reviews

Customer Project Photos

Review attachment by: Weronika M.Review attachment by: Weronika M.Review attachment by: B.B.Review attachment by: B.B.Review attachment by: Sven TaskeReview attachment by: Sven TaskeReview attachment by: Sven TaskeReview attachment by: Sven TaskeReview attachment by: Sven TaskeReview attachment by: Sven Taske
Verhoeven
20.10.2026
Country: NL
Degelijk product.
Weronika M.
16.10.2026
Country: PL
Położyliśmy mikrozement na całym parterze naszego biura i naprawdę zmienił on charakter tego miejsca. Jasnoszary odcień pasuje praktycznie do wszystkiego co na nim stoi, a jednolita powierzchnia bez fug sprawia że całe pomieszczenie wydaje się większe niż jest w rzeczywistości.
Review attachment by: Weronika M.
Review attachment by: Weronika M.
B.B.
03.09.2026
Country: DE
I used microcement on the exterior stairs. It was challenging because of the uneven surfaces, but I made the best of it. Stairs are a little more demanding than flat surfaces because you have to work around the edges and vertical surfaces, but it’s really not complicated. The product itself was excellent. You just need a little extra patience to achieve clean lines.
Review attachment by: B.B.
Review attachment by: B.B.
Millie
27.08.2026
Country: US
Picked up Cappocino for my living room walls. I really fancy the way it turned out!
Sven Taske
23.08.2026
Country: DK
I’ve finally finished renovating my bathroom, and I’m really happy with how it turned out. I was a little nervous about the application, but the material is quite forgiving once you get the hang of it. I even etched a small floral pattern into the shower niche while it was still fresh, which was a nice touch. I sealed everything properly, and so far there haven’t been any issues, even with daily exposure to water.
Review attachment by: Sven Taske
Review attachment by: Sven Taske
Review attachment by: Sven Taske
Review attachment by: Sven Taske
Review attachment by: Sven Taske
M. Villanueva
12.08.2026
Country: ES
I finished another microcement project this week, and I’m honestly pretty happy with how it turned out. It was a large, open room with high ceilings. We had to pay close attention to the detail around the ceiling light, but nothing too complicated. On a floor this size, you have to stay focused and keep your technique consistent, because any inconsistency will show. I applied the medium coat first and left it overnight before coming back with the fine coat. Seriously, don’t skip that waiting time—I’ve seen people try to rush it, and it never ends well. The mix is pretty straightforward once ...
Review attachment by: M. Villanueva

Label elements

A MICROCEMENT LARGE & MEDIUM: Danger. Causes serious eye damage. Causes skin irritation. May cause respiratory irritation. May cause an allergic skin reaction. Keep out of reach of children. Avoid breathing dust. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water and soap. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. If skin irritation or rash occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Dispose of contents/container to in accordance with local/regional/international regulations. Use only outdoors or in a well-ventilated area. The information on the product label must always be followed.

piktogram-ausrufezeichen-reagenzglas.png

LIQUID B: Warning. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/mist/spray. Do not get in eyes, on skin, or on clothing. Wear protective gloves/eye protection. IF ON SKIN: Wash with plenty of water and soap. Dispose of contents/container to in accordance with local/regional/international regulations. May produce an allergic reaction. The information on the product label must always be followed.

piktogram-ausrufezeichen.jpg

PU FINISH MATT A: Warning. May cause an allergic skin reaction. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water and soap. Take off contaminated clothing and wash it before reuse. Dispose of contents/container to an approved waste disposal facility. The information on the product label must always be followed.

piktogram-ausrufezeichen.jpg

PU FINISH MATT B: Warning. May cause an allergic skin reaction. Harmful if inhaled. May cause respiratory irritation. Harmful to aquatic life with long lasting effects. Keep out of reach of children. Do not breathe dust/fume/gas/mist/vapours/spray. Use only outdoors or in a well-ventilated area. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: Call a POISON CENTRE or doctor if you feel unwell. IF ON SKIN: Wash with plenty of water and soap. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Take off contaminated clothing and wash it before reuse. Store in a well-ventilated place. Keep container tightly closed. Contains isocyanates. May produce an allergic reaction. The information on the product label must always be followed.

piktogram-ausrufezeichen.jpg 

Related Products